ISI 23-1e Determination of Alkali Lability

ISI 23-1e Determination of Alkali Lability


1. ScopeThe method is applicable to starch, dextrin, acid and enzyme modified starch

 

LT 17 Dec.1964
Rev. LT 30 Aug 1999
2. PrincipleAcid is released by reorganising aldehyde end-groups in an alkaline environment. Ester groups such as acetate and adipate are hydrolysed by alkali. The acid is titrated as a comparative measurement of aldehyde-groups and thereby also of starch molecule length.

 

3. Apparatus3.1 Analytical balance weighing to the nearest 0.1 mg.
3.2 Stopwatch
3.3 Water bath
3.4 Beaker 400 ml
3.5 Conical flask 250 ml and rubber stopper with one hole fitted with a glass tube closed in one end by a rubber tubing. The free end of the rubber tubing is closed and a slit is cut in the tubing. The slit is functioning as a valve for the whole assembly.Vigorously boiling
3.6 pH-metre or titrator

 

4. Reagents4.1 Sodium hydroxide 0.4N, carbonate free.
4.2 Hydrochloric acid 0.2N
4.3 Sodium hydroxide 0.1N
4.4 Hydrochloric acid 0.1N

 

5. ProcedureWeigh 0.5 g sample to the nearest mg in a 250 ml conical flask (3.5)
Add 10 ml distilled water and stir well.

Gelatinising

Add 25.0 ml (4.1) alkaline and stir wellAvoid lump forming
When the starch is evenly gelatinised 65 ml 95 - 100 C hot distilled water is added. The flask is closed with the rubber stopper and valve. The flask is heated exactly 60 minutes in a vigorously boiling water bath (3.4). Cool flask immediately in running cold water.

Measuring

Flush the cooked starch into a 400 ml beaker and titrate to pH 8.0 with acid (4.2).  Note volume of acid  in ml (V).
Run a blind with 100 ml distilled water and 25.0 ml (4.1) alkaline. Note volume of acid in ml (B).

 

6. CalculationCalculate Alkali Lability of sample by averaging results of two samples with no decimal.

Alkali (Lability) Number =  ml 0.1N NaOH/g of starch dry matter = (V-B)*N*1000/(g*d), where

V = ml HCl used for titration of sample
B = ml HCl used for titration of blind
N = Normality of HCl used for titration
g = Sample weight in g
d = Sample dry matter in per cent

 

7. NoteThe Alkali Number is corrected in case of alkaline or acid sample. 1 g of sample is gelatinised in 50 ml hot distilled water. When evenly gelatinised the gel is cooled and titrated immediately to pH 8.0 with either acid (4.4) or alkaline (4.3). The titer as ml acid (4.4) used is added to the Alkali Number or ml alkaline (4.3) used is subtracted the Alkali Number

Comments

Post a Comment

Popular posts from this blog

ISI 19-6e Determination of Viscosity of Starch by Brabender

Return 1. Scope The method is applicable to starch   LT 08.12.1966 Rev. LT 7. Feb. 2000. 2. Principle Viscosity of native and modified starch is measured during controlled heating and cooling   Dynamic viscosity 3. Apparatus 3.1 Brabender viscograph, 700 cmg cartridge. Bowl rotational speed: 75 rpm. Starting temperature: 45  o C. Subsequent rate of temperature increase and decrease: 1½  o C/min. Use standardisation kit for calibrating. Starting temperature = Start of test. 3.2 Beaker, 1000 ml 3.3 Laboratory scale   4. Procedure Weigh starch sample equivalent to x g dry subs
Read more

ISI 14-2e Determination of Acetyl Content

  ISI 14-2e Determination of Acetyl Content 1. Scope The method is applicable to acetylated starch   KM Rev. LT 14 Sep 1999 2. Principle Bound acetyl reacts with strong alkali and excess alkali is titrated   3. Apparatus 3.1 Burette 3.2 Conical flask, Erlenmeyer 250 ml with stopper   4. Reagents 4.1 Sodium hydroxide 0.1 N 4.2 Sodium hydroxide 0.45 N 4.3 Hydrochloric acid 0.2 N 4.4 Phenolphthalein: 1 g in 1 l ethanol 90%   5. Procedure Weigh 5 g of sample to the nearest mg. Transfer to conical flask (3.2) and disperse in 50 ml distilled water. Add a few drops of indicator (4.4) and titrate with (4.1) to permanent pink colour. Bound acetyl reaction Add 25.0 ml of NaOH 0.45 N (4.2). Stopper and shake vigorously for ½ hour Use mechanical shaker Titration  Flush stopper and neck of flask with a little distilled water and titrate excess alkali with 0.2N HCL to disappearance of pink colour. Blank 25.0 ml 0.45N NaOH (4.2) is titrated as a blank   6. Calculation Calculate acetyl groups by avera
Read more

ISI 17-1e Determination of Viscosity of Starch by Brookfield

Image
ISI 17-1e Determination of Viscosity of Starch by Brookfield 1. Scope The method is applicable to native and modified starch - preferably starch for sizing of paper and textiles. LT 7. Oct. 2002. 2. Principle Viscosity of starch size prepared by indirect heating is measured as torque on a rotating spindle at constant speed and temperature 3. Apparatus 3.1 Brookfield Viscometer  RVDV-E (RV range) Alternative: LV range 3.2 Beaker, 1000 ml 3.3 Laboratory scale 3.4 Agitator with paddle stirrer IKA EUROSTAR digital + IKA paddle stirrer R1373 3.4 Boiling water bath and lid with slit for paddle stirrer Bath large enough for lid to cover bath and beaker 4. Procedure Weigh starch sample equivalent to 50 g (w) dry substance (DS) in a beaker (3.2) and add distilled water bringing total weight of starch and water to 500 g.  Put stirrer (3.4) in the beaker. Weigh the total weight of beaker, stirrer, starch and water (W g) Transfer beaker (3.2) to a boiling water bath. Attach stirrer to agitator an
Read more